Smart Cities
Connected Infrastructure for Extreme Heat
Published by IOT Phoenix Research & Editorial Team

- How Heat Stresses Infrastructure
- Power: The Dependency Behind Everything Else
- Water: Pressure, Pumps, and Leaks
- Traffic Signals, Cabinets, and Communications
- Streets, Shade, and Public Space
- Buildings and Shelters
- A Prioritization Method for Asset Owners
- Design for Heat From the Start
- Risks and Trade-offs
- Example: A Water Utility Prepares Its Pump Stations
- What Comes Next
- Standards, Data Sharing, and Mutual Aid
- Maintenance Windows and Seasonal Readiness
- Funding the Work
- Sources
Extreme heat does not only threaten people. It attacks the systems that keep a city running: transformers that overheat, pavement that softens, water pipes that expand and burst, batteries that age early, and signal cabinets that cook their electronics. Phoenix reached 115 degrees Fahrenheit at Sky Harbor on August 25, 2026, a record for that date, and APS and SRP both set peak demand records in late July. Infrastructure designed for historical temperatures now runs closer to its limits more often. Connected infrastructure, meaning assets with sensors and communications that report their own condition, gives owners a way to see stress building and act before a failure. This article walks through the main categories of infrastructure in a hot desert metro, what to monitor on each, and how to prioritize.
How Heat Stresses Infrastructure
| Infrastructure | How Heat Hurts | What Connected Monitoring Watches |
|---|---|---|
| Electric distribution | Transformers and cables lose capacity and age faster at high temperature and load | Load, winding or oil temperature, feeder current, voltage, outage events |
| Water distribution | Demand surges, pumps work harder, and thermal stress and soil movement contribute to leaks and breaks | Pressure, flow, pump current and vibration, leak detection |
| Roads and pavement | Asphalt softens, rutting increases, and surface temperatures can be dangerous | Surface temperature, deformation, condition scans |
| Traffic signals and communications | Cabinet electronics overheat, batteries fail, outages spread | Cabinet temperature, power status, battery health, network link status |
| Transit | Vehicles and shelters become unsafe, air conditioning fails, batteries degrade | Vehicle HVAC status, battery temperature, shelter and stop temperature |
| Buildings and shelters | Cooling failure turns a building into a hazard | Indoor temperature and humidity, equipment health, backup power |
Power: The Dependency Behind Everything Else
KJZZ reported in July 2026 that APS set a peak demand record about 400 megawatts above its previous record, with data centers accounting for roughly half of the increase. Utilities use sensors on substations, feeders, and transformers to see where load and temperature are approaching limits, and smart meters and grid-edge devices to detect outages faster. For customers, the main resilience tools are backup power and flexible load. Large buildings can use controls that shed noncritical load and pre-cool before peaks, covered in grid-interactive IoT and peak demand charges. For critical public facilities, such as cooling centers and water pump stations, backup generation and batteries need regular testing under real load and heat.
Water: Pressure, Pumps, and Leaks
Water demand rises in heat, and pumps run longer. Sensors on pump motors detect vibration and current changes that signal wear, and pressure monitors show surges that can break older pipes. Leak detection tools, from acoustic sensors on mains to meters that flag continuous flow at homes, reduce waste and damage. The City of Phoenix's chilled drinking water stations, which carry remote monitors that track use and detect leaks on a central dashboard, are a small but visible example of connected public water assets in the heat. See connected water infrastructure for metro Phoenix for the larger picture.
Traffic Signals, Cabinets, and Communications
Traffic cabinets sit in direct sun and contain controllers, switches, and batteries. Heat shortens component life and can cause failures at the busiest times. Monitoring cabinet temperature, power state, and battery health lets crews replace a weak battery or repair a failed fan before a signal goes dark. The City of Phoenix's ongoing network redesign, in which each of roughly 1,300 camera intersections is getting a new switch, according to Arizona's Family, creates an opportunity to build environmental monitoring into the cabinets as they are upgraded. Read more in Phoenix traffic infrastructure is becoming more connected.
Streets, Shade, and Public Space
Sensors on bus stops, parks, and sidewalks can report surface and air temperature, helping the city place shade and test materials such as reflective coatings. Pavement sensors and periodic scans can track rutting and cracking, which worsen in heat. Shade structures and trees are infrastructure too, and monitoring their condition and effect on temperature helps justify investment. Our article on block-by-block heat sensing explains how to map where shade matters most.
Buildings and Shelters
Cooling centers, libraries, clinics, and housing serve as heat refuges, and their cooling systems must work. The City of Phoenix's 2026 plan includes a 24/7 respite center and extended library hours. Monitoring HVAC equipment in these buildings, with alerts to maintenance staff, and keeping backup power ready, protects both occupants and the city's heat response. Our guides to commercial HVAC monitoring in Phoenix properties and smart buildings adapting to extreme heat describe the equipment side.
A Prioritization Method for Asset Owners
- List critical assets. Rank by consequence of failure, such as hospitals, water pumps, cooling centers, key signals, and substations.
- Estimate heat vulnerability. Consider age, rated temperature, and past failures.
- Choose the cheapest effective monitoring. Temperature, current, and power status often provide the best early warning.
- Connect to a shared view. Combine asset alerts with the heat forecast and the operations dashboard.
- Define response playbooks. Spell out who acts and what they do for each alert.
- Test before summer. Exercise backup systems and alert paths in spring.
- Learn after events. Record failures and update the plan.
Design for Heat From the Start
- Rate equipment for the real environment. Specify operating temperatures that exceed the worst expected cabinet and roof temperatures.
- Shade and ventilate. Simple sunshades and vents can reduce cabinet temperatures noticeably.
- Plan battery replacement cycles. Heat shortens battery life, so schedule replacements earlier than datasheets suggest.
- Use communications with backup. A single network path creates a single point of failure.
- Protect against dust and monsoon. Seal enclosures and add surge protection.
Risks and Trade-offs
- More devices, more failure points. Every sensor can fail in heat, so choose rugged equipment and keep the monitoring simple.
- Cybersecurity. Connected infrastructure expands the attack surface. Segment networks and update devices.
- Alert overload. Prioritize alerts by consequence.
- Funding. Maintenance budgets are often cut first. Monitoring helps justify them by showing risk.
- Data silos. Utilities, cities, and counties each hold part of the picture. Agreements to share data in emergencies pay off.
Example: A Water Utility Prepares Its Pump Stations
Consider a hypothetical Valley water utility with 40 pump stations. Before summer, it adds temperature and vibration sensors to the oldest pumps and motor control cabinets, and installs remote monitoring of generator readiness and fuel. During a week of 114 degree days, the dashboard shows two stations with rising motor temperatures. Crews clean a clogged vent and replace a failing fan before either station trips. When a storm knocks out power to a neighborhood, a generator starts as planned, and operators watch pressure to ensure fire flow. After the season, managers use the data to rank replacement projects. The scenario is illustrative, but it reflects the usual pattern of cheap sensors on high-consequence assets.
What Comes Next
As records fall, infrastructure owners are likely to revisit design temperatures and maintenance practices, and funding programs for resilience will favor projects that include monitoring. Expect more coordination among utilities, cities, and health agencies. For the people side of the response, see how Phoenix can use IoT to monitor urban heat, and browse our smart city coverage.
Standards, Data Sharing, and Mutual Aid
Heat emergencies cross jurisdiction lines. A transformer failure affects water pumps, signals, and cooling centers at the same time, and the owners are different organizations. Agreements to share status data during emergencies, using common formats, let a city see that a neighborhood has lost power and a utility see that a cooling center has opened nearby. Mutual aid arrangements, in which neighboring utilities and cities lend crews and equipment, work better when each side can see the other's asset status. Standards for time stamps, location, and asset identifiers cost little and make later integration far easier.
Maintenance Windows and Seasonal Readiness
Heat resilience is largely a maintenance discipline. Spring is the time to clean cabinet vents, test batteries and generators, check refrigerant and coolant levels, inspect pump bearings, and verify that alerts reach the right phones. Monitoring data makes this work more targeted, because crews can start with the assets that already show stress. Agencies that treat spring readiness as a formal program, with checklists and sign-off, tend to see fewer summer failures. Document what was found and fixed, because the following year's plan starts from those records.
Funding the Work
Monitoring can look like an optional extra until a failure occurs. Resilience grants, such as the federal Building Resilient Infrastructure and Communities program that funded training in Phoenix's 2026 heat plan, utility efficiency programs, and capital replacement budgets can all support it. A strong case describes the consequence of failure, the likelihood without monitoring, and the expected reduction in risk. Even simple estimates, such as the cost of an emergency repair at 115 degrees compared with a planned replacement in March, can make the point.
Whichever route a city, utility, or property owner chooses, the practical advice is the same: start with a clear problem, measure a baseline, pilot on a small area, and publish what you learn. Honest reporting of results, including what did not work, builds the trust that large infrastructure programs need, and it surfaces issues with heat, connectivity, and staffing while they are still inexpensive to fix.
Sources
- KTAR: Phoenix breaks 15-year heat record
- KJZZ: APS peak demand record
- City of Phoenix: Smart Cities
- Arizona's Family: Phoenix traffic camera outage tied to citywide network upgrade
- City of Phoenix: 2026 Heat Response Plan
